VIVOUniversal Extending Ceiling Projector Mount, Height Adjustable Projection, White, MOUNT-VP02W

This product works well. It’s durable and holds an average sized projector. (The package says weight limit of 30 lbs.) We used it with the Epson 3800. Initially, I thought it would not work, but I ended up googling the mount and learned that we could connect three of the legs instead of four, one in the front center hole and two angled at the back holes. It was easy to mount and is very flexible for tilting to adjust your projector.

Super nice ceiling mounting bracket kit for digital projector! This is made of nice sturdy metal and aluminum extruded materials with a nice white powdercoat finish. There is hardware and everything needed to install this and mount the projector. There is a ton of adjustability with the way that this bracket has been made. The bracket can also be extended for additional height adjustment. I used this in a brew house for a video presentation and mounted on some bracketing in the ceiling. I was able to tilt, rotate and adjust the projector in every possible way. The mounting brackets that attach to the projector are versatile as well and will adapt to any configuration you throw at it! Sturdy and well thought design. Two thumbs way up!

This mount is cheap and does what it is supposed to. The armature has enough room to hide power, HDMI, and trigger wires with a little to spare. The mount is white just like most ceilings (why black mounts and projectors on a white ceiling? Silly.).This is ideal for my particular installation. Nobody makes a mount designed to clear a standard ceiling-mount ceiling fan. There are long down rods and tight surface-mount brackets , but no mid-length mounts.This mount is made of thin aluminum and is easy to hacksaw through to create a custom length. Measure twice and thoroughly think through the geometry first. To accomplish this you will need:Tape measureHacksawMasking tape to protect the finishMotor tool or file to finish cutout for wiresSandpaper to clean up edgesDrill and bit to redrill holes in down rodThere are countless odd custom installation needs that this could be the answer to. Plus it’s cheap enough that if you muck it up there’s no need to cry.I do not like the way the projector bracket mounts to the down rod. It’s awkward and damned near impossible. Perhaps it would work better if the bracket/down rod assembly were connected first and then slid into the female section of the down rod. You’d still have to fight the wires but at least there would only be one screw to contend with.The second big ding in the score is the lack of fine adjustment in the mount. Using the mount to correct projector/screen alignment is preferable to using lots of keystone correction. Most mounts have provisions for tilting the projector front/back and left/right through screws or thumbscrews. This one relies on manhandling. I even had to shim the top of the mount to get it to hold level.If I were still installing projectors for pay I’d definitely keep one or two of these on hand for odd installations. It would not be difficult for the manufacturer to modify this design to intentionally be cut to size. That sure would be handy and, I’d assume, probably sell well.

I'm posting this more to help others who have projectors with 3 mount points on the bottom than as a normal review. It's very strong and adjustable, so no complaints there. It took me a bit of fiddling to get it attached to my projector, so hopefully the picture and my description will help.I removed one of the four mounting arms, and loosened the other three, then figured out which bolts fit my projector, and loosely screwed them in. I had holes in the circular bracket over the screws to allow me to get them tight enough (I didn't want to damage the projector housing by screwing too tight, but I can't give you a torque value or anything like that). This still allowed some movement of the arms so that I was able to adjust them to have the center of the bracket very close to the center of the triangle between the 3 mounting points. It seemed like that was the best way to center it, otherwise the projector would have tried to tilt, and I didn't want to have to fight gravity by tightening the other bolts on the mounting pole structure (although it's designed to be able to do that - but best not to if you don't have to, I thought).

This unit is great. I really appreciate how they designed the very bottom where the arms attach to the unit. My projector did not have mounting holes as wide as required by the mount, so I bought a 6" acrylic circle and mounted the projector to one side of the acrylic circle and then removed the mount's included arms and mounted the acrylic circle to this ceiling mount. Took some time and patience and simple drilling but it looks great.